Skulls by Maratac®

One of our cadre with over 20 years of jewelry experience custom made the skull inspired by his passion and appreciation for mausoleum skulls. You really have to hold one of these in your own hand to appreciate the craftsmanship and attention to detail.  Skulls can be heat treated to create a unique coloring effect. The skull can be drilled in any direction to form a cord clutch, lanyard or even drawer pull.

We have seen many skulls over the years made from pewter, plastic and even cheap pot metal, this is not one of those skulls. The Maratac® skull is a fine piece of hand-polished stainless steel that will embellish any EDC gear fanatic kit. The quality craftsmanship infused into every piece guarantees an unmatched longevity that will not tarnish over the years.

Maratac® holds all rights as the exclusive designer and proprietary maker of the Maratac® Skull. You won’t find these skulls elsewhere, so act fast and get your skull before they are gone. Each skull is laser engraved with a subdued Maratac® logo on the medulla.

Each skull has its own markings from the cast and polishing process, making each skull unique. No two skulls are exactly the same.

Tivoli:

Specifications:

• High-density induction vacuum casting

  • • Copper
      
• 14.5 grams ( over half an ounce )
• Cast from a wax model hand carved skull

• Dimensions : 20mm x 13mm x 16mm

• Without Lanyard Hole

Yorick:

Specifications:

• • High-density induction vacuum casting
• 300 grade non-magnetic high grade stainless
• 15.6 grams ( over half an ounce )
• Cast from a wax model hand carved skull
• Dimensions : 20mm x 13mm x 18mm
• With Lanyard Hole

Goliath:

Specifications:

• • High-density induction vacuum casting
• 300 grade non-magnetic high grade stainless 
• 3.05 ounces compared to the 0.5 ounce Yorick skull (600 percent heavier)
• Cast from a wax model hand carved skull
• Dimensions : 31mm x 23mm x 37mm 
• No hole in head

Colossus:

2400% Heavier Than The Yorick Skull @ ( 3/4 LB !!!)

Paper weight size, extremely Heavy! 

Specifications: 

• • • 300 high grade stainless
• • High-density induction vacuum casting
• 9 ounces compared to the .5 ounce Yorick skull ( 2400 % heavier ) ( 3/4 of a pound !!!)
• Cast from a wax model hand carved skull
• Dimensions : Length 62mm x Tall 50mm x 39mm Wide
• No hole in head ( Holes are in the jaw )
• Can tie tether cord through jaw on both sides.

Mammoth:

Display weight size, extremely Heavy!

WARNING THE MAMMOTH SKULL IS EXTREMELY HEAVY AND SHOULD BE HANDLED WITH CARE AND RESPECT!

Specifications:

• • High-density induction vacuum casting

    • • Can be welded to / TIG
        
• Can be brushed / drilled & tapped
• 300 series high grade stainless 
• 10 Times Heavier Than The Colossus Skull @ ( ~ 7.5 LB ) 
• Cast from a wax model hand carved skull
• Dimensions : Length 127mm ( 5 Inches ) x Tall 104mm x 87mm Wide
• No hole in head ( Holes are in the jaw )

Behemoth: - Back In Limited Stock ( New Hollow Cast )

Display weight size, extremely Heavy!

Created for private art show honoring Día de los Muertos ( Day Of The Dead ).

Limited Run 50 Pieces! Each One Is Unique & Will Have Markings Based On Mold Flashing! Made By Master Artist Tony Fabrioli !

WARNING THE BEHEMOTH SKULL IS HEAVY AND SHOULD BE HANDLED WITH CARE AND RESPECT! THIS IS A 2 HAND CARRY

Specifications:

• High-density induction vacuum hollow casting - Benefit is the skull ways 60% less but is still heavy with very thick walls.
  
• • Can be welded to / TIG
• 300 series high grade stainless deep frame housing  
• ( ~ Average Weight 7-8 LBS ) 
• Cast from a wax model hand carved skull
• Dimensions : Length  7.5"  x Tall 6" x 4.6" Wide

Mammoth & Behemoth Skulls are extremely limited! 

Knives in pictures not included and can be seen by Olamic Tactical

ONE SHEAR® Pro

• Original design, trusted by thousands of professionals worldwide
• Heavy-duty stainless steel build, designed for first responders, military, and tactical gear
• Cuts through tough fabrics, webbing, boots, and gear reliably
• Best for users who want a proven, all-around trauma shear

ONE SHEAR® V2 (DLC Coated, 2.25mm)

• The next evolution of the Pro with upgraded Diamond-Like Carbon coating
• DLC provides extreme durability, scratch resistance, and corrosion protection
• Built for the harshest environments and long-term heavy-duty use
• Ideal for paramedics, law enforcement, military, and survivalists who demand the toughest option

ONE SHEAR® Mini

• Compact, lightweight version for Everyday Carry (EDC)
• Cuts bandages, tape, paracord, and light materials with ease
• Perfect for range bags, hiking kits, glove compartments, and compact first aid setups
• Best choice for adventurers, outdoorsmen, and anyone needing a pocket-sized solution

ONE SHEAR® BUS (Basic Utility Shear, Fluoride Coated, 1.8mm)

• Budget-friendly model, crafted from rolled J2 420 steel with fluoride coating
• Great for medical students, training environments, and light clinical use
• Cuts bandages, gauze, and clothing but not designed for extreme-duty scenarios
• Ideal as a starter shear, classroom tool, or backup option

All Items are Shipped using USPS at this time; unless international orders than UPS.

Available USA Shipping options:

Processing times

Standard Processing: 3-5 days processing USPS

Skip The Line Processing: 1-2 day processing USPS

Available International (non-USA):

Under 1lbs: $40 UPS

1-lbs $70 UPS